Upgrading your windows is a quick home improvement project that can help your family save money and make your home more comfortable.

Windows

When replacing you old windows with new ones, always choose energy-efficient windows. Newly designed windows conserve energy in numerous ways, from special glass coatings to tight-sealing gaskets. Double glazed windows are the most efficient modern windows available. These windows have gas filled glazing cavities that prevent heat transmission and help you to lower heating and cooling costs forl your home.

Replacing the windows at your residence is among the most important steps in perfecting your home. This is because the windows are among the initial thing a person notices in a home. Make sure you get windows that happen to be durable. Vinyl windows are the most useful choice for durability and strength.

If you live inside a hot climate, replace your original glass windows with low-E glass, that will make it more and easier reasonable for cool your property inside the boiling summertime. While the installation can be quite a bit pricey if you pay someone to do it, you may recoup your costs in energy savings in the end from the summer.

Replace your windows. If you have damaged and drafty or cracked windows, replacing them is a quick redecorating project with huge rewards. Replacing them with weather resistant or high efficiency windows will let them pay for themselves right away as well as give your own home a whole new fresh look.

Through the use of passive solar heating, save energy and cash. Use thermal drapes in your windows and keep them open in the sunny part of the day in the wintertime and closed in the sunny part of the day in summer. Be sure to seal out drafts around doors and windows in order to avoid unwanted hot or cold air from entering.

Consult a local HVAC company
To ascertain if you might be eligible for a government grant to weatherize your property, you may want to speak with a local HVAC company or a home energy consultant. In the interest of saving energy, your heating and air conditioning company may suggest you insulate your attic, weatherstrip your windows and doors and in many cases replace your ancient cooling and heating system. It's a great way to save on home heating and cooling cost!

By having weatherstripping to maintain your doors and windows from leaking warm or cool air, boost your home in an eco-friendly way. Besides making your property weatherproof help the environment, it can also help to put a lot of your hard earned dollars back in your wallet.

Use window coverings, including curtains to complete your home decor look and make your windows look beautiful. You need to choose curtains which are three times wider than your window and enable for enough window coverage. If you are looking to let more light in your house choose curtains which can be sheer.

If you home in over five years old, the windows at your residence might need to be replaced.  Whenever you can, opt for double-glazed windows. You may have to pay a little bit more in advance, however they will be worth the cost whenever they begin saving you money on your own power bill. New windows also enhance your homes security. Should your budget is not going to permit you install new windows, spruce up your old ones using a fresh coat of paint, or try some new window treatments or blinds.

So, redesigning is not really as complicated as it may appear, as you can see. It makes it worth while in the long run, although it is involved in terms of research and asking them questions. Together with the above tips in your mind, you have to be smarter when it comes to improving things around your own home.

By Randy Covington

Simply put windows...are what you put in the holes in your house. Think about that. Holes in your house. It seems to me that if you are going to have holes in your house, you want a very good quality window to prevent the those holes from letting the conditioned air out and the cold air in and rain from destroying the interior of your house.

Their are three basic categories of replacement windows: 

• Wood
• Aluminum
• Vinyl

I will discuss wood windows in particular in this post and specifically clad windows as very few people wish to put unclad windows in their house due to the added maintenance of having to paint them every 3-5 years.

Wood windows are made of wood, (primarily pine) but are sold primarily with a cladding on the exterior to reduce the exterior maintenance requirements that attach to all windows (no painting). The cladding is typically Aluminum, however their are increasing options in this regard in the form of extruded and sheet noble metal claddings such as Bronze, Copper and Zinc.

The last 3 materials are generally sold only on custom windows which are very expensive and typically can only be justified on hard budgets of over $ 400 PSF. If your like me (and most others) you will not be building a home in this range.

However, there are a few copper alternatives manufactured by commodity window manufacturer's that might in fact fit into your budget. I will discuss these in greater detail in a later post. Anyway back to clad wood windows.

The best known names in this field (due to huge marketing budgets) are Anderson, Pella, Weathershield, Jeld-Wen and Marvin. They probably comprise about 65% market share between them and each of them have their own specific advantages and disadvantages. Only a careful review of the features and benefits of each window will reveal what is best for your project. A brief description of the features that I consider important when reviewing the various windows follows below:

Anderson - unique in that the wood window made by Anderson is clad with a PVC vinyl cladding. The cladding is bound to the wood substrate with an adhesive type mechanism which has shown effective, but in some extreme climates worries me that it could detach.

The window is backed by a top-notch warranty and I have anecdotal experience that the company takes its warranty obligations seriously. A good thing indeed. There was manufacturing problem with the welding of the corners of the vinyl cladding some years back on a lot of windows that made its way to Colorado. I was selling Anderson windows at that time and know that the Company spent a very healthy sum of money to find the windows with the problem and fix them before the owners knew there was a problem. It is not that usual to see this kind of pro-active attitude in any company.

The other features of the window include a proprietary glazing system that will require that you will always have to go the Anderson for replacement and a reticence by the company to put breather tubes in their glazing system (critical in high altitudes). Anderson is the largest manufacturers of windows (under one brand) in the U.S. Anderson sells their product through a dealer network composed of lumber yards, window dealers and home-improvement contractors. Anderson mow also sells a line of composite windows made from the waste wood derived from manufacturing its wood windows,

Pella - Pella manufacturers windows clad and unclad in Iowa and markets them through primarily authorized distributors although they have recently started to distribute their builder grade line through Home Depot. The Pella product is distinguished by the availability of buit-in roll-down insect screens, between-the-glass window blinds and and an exclusive distributorship for the clearest window screening material made in the United States.

Pella's clad system is roll-formed and loosely attached which can cause problems such as "oil-canning" in very hot climates and the possibility of condensation forming underneath the cladding in high-humidity locales leading to rot of the underlying sash. Otherwise Pella makes good quality window. Pella now manufactures a line of composite windows which show promise from a performance perspective.

Jeld-Wen - sells wood windows under a variety of brand names including Jeld-Wen, Pozzi, Wilmar and a few others. All of these brands were more or less regionally well-known brands and Jeld-Wen has made a weak effort to unify the brands either from a marketing perspective or from a manufacturing perspective from what I can tell. The various brands have quality reputations that you will have to judge for yourself. The Jeld-Wen moniker is a holding company for a broad range of construction products that make Jeld-Wen a very large presence in the construction products category, a great many of them in the commodity category. They are an excellent manufacturer.

Marvin - is an old line family owned firm that manufactures a broad line of wood windows and composite windows. One of the distinguishing features of the Marvin brand is that the aluminum clad version is actually an extruded aluminum sash with a Wood insert to the interior. This scenario is also a feature of the Weathershield line and the Window Technologies line in the Midwest. This method makes for a more rigid sash, and eliminates the possibility of oil-canning and reduces the chances of moisture forming under the cladding. It also places a barrier dead air space underneath the sash which should add somewhat to its performance in cold climates.

These are the (4) largest manufacturers of wood windows in the United States based on market share. The relative value of their window products is affected by a range of factors that will make your choice dependent on your specific needs. There are also a great many regional manufacturers that make good quality windows that will be equally prevalent in your locale. I will discuss those in another post.

My personal selection for the highest quality wood clad window available would be Loewen Windows. Loewen is a Canadian company that is based in the far Northwest so I am not sure you will find them widely distributed in your area of the country. A few things that distinguish the design of the Loewen is that it is built out of Vertical Grained Doug Fir which is a moderately durable wood (better than pine) and is more beautiful than pine if you are staining the interior.

The window also is designed to meet the Canadian standards for Air infiltration which are the toughest in this hemisphere. The window is very well made and they are still a small enough company that customer desires and satisfaction are central to the operation of the company. I would highly recommend them.

Randy Covington has over 30 years experience in construction. Formerly Licensed as a Residential Builder in Florida and an unlimited General Contractor in South Carolina, he has built small commercial and residential projects in the Southeast and West. Randy has spent the last 15 years selling construction products from lumber to custom windows with Bronze and Copper cladding to some of the most expensive residences on the planet. If you have question on constructing your own home or on windows, or need to source something really unusual for your home, you may reach him at www.myhomespace.biz or at [email protected].

Article Source: http://EzineArticles.com/?expert=Randy_Covington

Manufacturers have their windows tested for use in various altitudes. Using double-pane insulating glass at altitudes higher than its rating will result in glass distortion and increased possibility of breaking.  As the altitude increases, the atmospheric pressure decreases, causing the sealed window glaze to expand its volume to reduce the interior pressure.  This will cause the glass to deflect  and can lead to damage.  The difference in pressure is also applied along the edge seal and ultimately failed sealing.

Some window manufacturers have developed glass technology that increases altitude limits on energy efficient glazed inputs to as high as 10,000 feet. When selecting windows in various locations that have possible altitude problems, check with the manufacturer to verify the suitability of the windows chosen.  For example, Andersen Windows has data on windows for altitudes from 3,000 to 10,000 ft.

If you live at an altitude over 5,000 ft, you will want to check with your window company that the windows you are going to buy are manufactured for altitude.   If you live in Colorado and need new windows, give Prestige Window & Doors a call (303) 502-5888.  They work with several different manufacturers that specialize in high altitude window.

By Randy Covington
Simply put windows...are what you put in the holes in your house. Think about that. Holes in your house. It seems to me that if you are going to have holes in your house, you want a very good quality window to prevent the those holes from letting the conditioned air out and the cold air in and rain from destroying the interior of your house.

Their are three basic categories of windows:

• Aluminum
• Vinyl
• Wood
  

I will discuss wood windows in particular in this post and specifically clad windows as very few people wish to put unclad windows in their house due to the added maintenance of having to paint them every 3-5 years.Wood windows are made of wood, (primarily pine) but are sold primarily with a cladding on the exterior to reduce the exterior maintenance requirements that attach to all windows (no painting). The cladding is typically Aluminum, however their are increasing options in this regard in the form of extruded and sheet noble metal claddings such as Bronze, Copper and Zinc.

The last 3 materials are generally sold only on custom windows which are very expensive and typically can only be justified on hard budgets of over $ 400 PSF. If your like me (and most others) you will not be building a home in this range.

However, there are a few copper alternatives manufactured by commodity window manufacturer's that might in fact fit into your budget. I will discuss these in greater detail in a later post. Anyway back to clad wood windows.

The best known names in this field (due to huge marketing budgets) are Anderson, Pella, Weathershield, Jeld-Wen and Marvin. They probably comprise about 65% market share between them and each of them have their own specific advantages and disadvantages. Only a careful review of the features and benefits of each window will reveal what is best for your project. A brief description of the features that I consider important when reviewing the various windows follows below:

Anderson - unique in that the wood window made by Anderson is clad with a PVC vinyl cladding. The cladding is bound to the wood substrate with an adhesive type mechanism which has shown effective, but in some extreme climates worries me that it could detach.

The window is backed by a top-notch warranty and I have anecdotal experience that the company takes its warranty obligations seriously. A good thing indeed. There was manufacturing problem with the welding of the corners of the vinyl cladding some years back on a lot of windows that made its way to Colorado. I was selling Anderson windows at that time and know that the Company spent a very healthy sum of money to find the windows with the problem and fix them before the owners knew there was a problem. It is not that usual to see this kind of pro-active attitude in any company.

The other features of the window include a proprietary glazing system that will require that you will always have to go the Anderson for replacement and a reticence by the company to put breather tubes in their glazing system (critical in high altitudes). Anderson is the largest manufacturers of windows (under one brand) in the U.S. Anderson sells their product through a dealer network composed of lumber yards, window dealers and home-improvement contractors. Anderson mow also sells a line of composite windows made from the waste wood derived from manufacturing its wood windows,

Jeld-Wen - sells wood windows under a variety of brand names including Jeld-Wen, Pozzi, Wilmar and a few others. All of these brands were more or less regionally well-known brands and Jeld-Wen has made a weak effort to unify the brands either from a marketing perspective or from a manufacturing perspective from what I can tell. The various brands have quality reputations that you will have to judge for yourself. The Jeld-Wen moniker is a holding company for a broad range of construction products that make Jeld-Wen a very large presence in the construction products category, a great many of them in the commodity category. They are an excellent manufacturer.

Marvin - is an old line family owned firm that manufactures a broad line of wood windows and composite windows. One of the distinguishing features of the Marvin brand is that the aluminum clad version is actually an extruded aluminum sash with a Wood insert to the interior. This scenario is also a feature of the Weathershield line and the Window Technologies line in the Midwest. This method makes for a more rigid sash, and eliminates the possibility of oil-canning and reduces the chances of moisture forming under the cladding. It also places a barrier dead air space underneath the sash which should add somewhat to its performance in cold climates.

Pella - Pella manufacturers windows clad and unclad in Iowa and markets them through primarily authorized distributors although they have recently started to distribute their builder grade line through Home Depot. The Pella product is distinguished by the availability of buit-in roll-down insect screens, between-the-glass window blinds and and an exclusive distributorship for the clearest window screening material made in the United States.

Pella's clad system is roll-formed and loosely attached which can cause problems such as "oil-canning" in very hot climates and the possibility of condensation forming underneath the cladding in high-humidity locales leading to rot of the underlying sash. Otherwise Pella makes good quality window. Pella now manufactures a line of composite windows which show promise from a performance perspective.

These are the (4) largest manufacturers of wood windows in the United States based on market share. The relative value of their products is affected by a range of factors that will make your choice dependent on your specific needs. There are also a great many regional manufacturers that make good quality windows that will be equally prevalent in your locale. I will discuss those in another post.

My personal selection for the highest quality wood clad window available would be Loewen Windows. Loewen is a Canadian company that is based in the far Northwest so I am not sure you will find them widely distributed in your area of the country. A few things that distinguish the design of the Loewen is that it is built out of Vertical Grained Doug Fir which is a moderately durable wood (better than pine) and is more beautiful than pine if you are staining the interior.

About the Author
Randy Covington has over 30 years experience in construction. Formerly Licensed as a Residential Builder in Florida and an unlimited General Contractor in South Carolina, he has built small commercial and residential projects in the Southeast and West. Randy has spent the last 15 years selling construction products from lumber to custom windows with Bronze and Copper cladding to some of the most expensive residences on the planet. If you have question on constructing your own home or on windows, or need to source something really unusual for your home, you may reach him at www.myhomespace.biz

Article Source: http://EzineArticles.com/?expert=Randy_Covington